Signal Generators

Baseband Signal Generator

AFQ100B UWB Signal and I/Q Modulation Generator
AFQ100A I/Q Modulation Generator
EX-IQ-Box Digital Signal Interface Module
  • System bandwidth (RF) :
    • 200 MHz (Mode 1)
    • 528 MHz (Mode 2)
  • Memory clock:
    • 1 kHz to 300 MHz (Mode 1)
    • 600 MHz (Mode 2)
  • 200 MHz RF bandwidth in standard mode
  • 528 MHz RF bandwidth in broadband mode
  • Long signal duration of up to 1 Gsample (option)
  • R&S®WinIQSIM2™ option for flexible UWB (ECMA-368) signal generation (R&S®AFQ-K264)
  • Almost all R&S®AFQ100A features included
  • R&S®Pulse Sequencer Software for generating complex pulse patterns (R&S®AFQ-K6 option)
  • Excellent spurious-free dynamic range (SFDR) of typ. 78 dBc
  • Digital standards like WCDMA, LTE, HSPA, WLAN802.11a/b/g/n/ac, MB-OFDM UWB … using WinIQSIM2™
  • LXI Class C conformant
  • System bandwidth (RF) : 200 MHz
  • Memory clock: 1 kHz to 300 MHz
  • Outstanding signal quality
  • Tailored to digital communications systems
  • Variable memory clock rate (1 kHz to 300 MHz) can optimally be adjusted to the useful signal
  • RF bandwidth of 200 MHz
  • Long signal duration of up to 1 Gsample (R&S®AFQ-B11 option)
  • Excellent spurious-free dynamic range (SFDR) of typ. 83 dBc
  • R&S®WinIQSIM2™ options for communications standards such as LTE, WCDMA, HSPA, HSPA+, GSM/EDGE, EDGE Evolution, VAMOS, CDMA2000®, 1xEV-DO, WLAN, WiMAX™, Bluetooth®, etc.
  • LXI Class C conformant
  • Conversion of digital I/Q signals to and from the device under test
  • Flexible user-defined digital I/Q interface settings
  • Two breakout boards included (single-ended, differential connectors) for connection of the device under test
  • Easy interface configuration via enclosed R&S®DigIConf software
  • Transient recorder in R&S®DigIConf for visual control of generated digital signals
  • Optional support for CPRI™

Analog Signal Generator

SMA100B RF and Microwave Analog Signal Generator
SMF100A Microwave Signal Generator
SMA100A Signal Generator
  • Frequency range from 8 kHz to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz
  • SSB phase noise of <-152 dBc (typ.) at 1 GHz and <-132 dBc (typ.) at 10 GHz, each at 20 kHz offset
  • Wideband noise <-162 dBc (meas.) at 10 GHz and an offset of 30 MHz
  • Nonharmonics below -110 dBc at 1 GHz
  • Ultra high output power
  • Up to 38 dBm with the 6 GHz instrument
  • Up to 32 dBm in the microwave frequency range with the 20 GHz instrument
  • Exceptionally low harmonics
  • State-of-the-art GUI with touchscreen

  • Max. frequency range from 100 kHz to 43.5 GHz
  • Up to 170 GHz with R&S®SMZ frequency multiplier
  • Excellent SSB phase noise of typ. –120 dBc (at 10 GHz; 10 kHz carrier offset)
  • Very high output power of typ. +25 dBm
  • Optional pulse modulator with excellent data
  • Unique pulse train generation
  • Versatile power analysis with additional R&S®NRP-Zxx power sensor

 

  • Frequency options from 9 kHz to 3 GHz/6 GHz
  • Very low SSB phase noise of typ. -141 dBc (at 1 GHz, 20 kHz offset, 1 Hz measurement bandwidth) with option
  • High output power of up to +18 dBm (+28 dBm in overrange)
  • Emulation of legacy instruments
  • Electronic attenuator with built-in overvoltage protection over entire frequency range
SMB100A RF and Microwave Signal Generator
SMC100A Signal Generator
SGS100A SGMA RF Source
  • Wide frequency range from 9 kHz to 6 GHz or from 100 kHz to 40 GHz
  • Excellent signal characteristics with low SSB phase noise of typ. –128 dBc (at 1 GHz, 20 kHz offset)
  • High output power of typ. up to +27 dBm

  • All important analog modulations with AM, FM/φM and pulse modulation supported
  • Compact size with only two height units and low weight
  • Frequency range 9 kHz to 1.1 GHz or 3.2 GHz
  • Maximum output level of typ. > +17 dBm
  • Optional high-stability reference oscillator
  • Analog modulation modes (AM/FM/φM/pulse) integrated as standard
  • Integrated overvoltage protection
  • Wear-free electronic attenuator
  • Minimized total cost of ownership
  • Frequency range: 1 MHz to 6/12.75 GHz
  • Level range: -120 dBm to +15 dBm
  • Setting time: < 500 µs
  • Smallest fully integrated vector signal generator on the market, space-saving design for system integration
  • Enables high throughput due to very short frequency and level setting times of typ. 280 μs via PCIe interface
  • Excellent RF performance in a compact format
  • Maximum output level of typ. +22 dBm for compensating losses in the setup
  • Closed ALC loop for CW and I/Q modes for highest level repeatability
  • High output frequency up to 12.75 GHz for broad applicability
  • Wear-free electronic attenuator for high reliability
  • Very cost-efficient with low initial costs and low cost of ownership
SGU100A SGMA Up-converter
SMZ Frequency Multiplier
  • Frequency range : 1 MHz to 6 GHz, 1 MHz to 12.75 GHz
  • Frequency extension to 40 GHz with the R&S®SGU100A upconverter
  • Two instruments into one: one RF output for the entire frequency range
  • Seamless integration into existing user interfaces
  • Lowest form factor and power consumption on the market
  • High performance up to microwave frequencies
  • Output Frequency Range: 50 GHz -170GHz
  • Wide frequency range
  • Wide dynamic range
  • Easy handling
  • High signal quality

RF Vector Signal Generator

SMW200A Vector Signal Generator
SMBV100A Vector Signal Generator
SGT100A SGMA Vector RF Source
  • Frequency range from 100 kHz to 3 GHz, 6 GHz, 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz
  • Optional second RF path with 100 kHz up to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz
  • Versatile configuration: from single-path vector signal generator to multichannel MIMO receiver tester
  • Ideal for MIMO, MSR or LTE-Advanced applications thanks to up to eight signal sources and up to 32 fading channels
  • Modular architecture for optimal adaptation to the application at hand
  • Frequency options from 9 kHz to 3.2 GHz/6 GHz
  • Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
  • Optional ARB-only baseband generators as cost-saving alternatives
  • Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
  • Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS
  • Special package for cost efficient GNSS Production Tester
  • RF bandwidth of up to 160 MHz with internal baseband generator
  • I/Q modulator with 528 MHz RF bandwidth
  • Optimized for high production throughput
  • Prepared for aerospace and defense applications
  • Low cost of ownership due to simple service concept
  • Fastest vector signal generator with frequency and level switchover times of 240 μs (typ.) for optimized throughput in production
  • Smallest standalone vector signal generator up to 6 GHz with integrated baseband generator (1 HU ½ 19″)
  • Integrated baseband generator with I/Q modulation bandwidth of up to 240 MHz (in RF) supporting all advanced digital standards, including IEEE 802.11ac
  • Excellent RF performance for EVM and ACLR
  • Easy signal generation for digital standards such as LTE and LTE-Advanced using the R&S®WinIQSIM2™ simulation software
  • Ideal enhancement for the R&S®SMW200A in MIMO applications with more than two receiving antennas
SGS100A SGMA RF Source
SGU100A SGMA Up-converter
SZU100A IQ Up-converter
  • Frequency range: 1 MHz to 6/12.75 GHz
  • Level range: -120 dBm to +15 dBm
  • Setting time: <500 µs
  • Smallest fully integrated vector signal generator on the market, space-saving design for system integration
  • Enables high throughput due to very short frequency and level setting times of typ. 280 μs via PCIe interface
  • Excellent RF performance in a compact format
  • Maximum output level of typ. +22 dBm for compensating losses in the setup
  • Closed ALC loop for CW and I/Q modes for highest level repeatability
  • High output frequency up to 12.75 GHz for broad applicability
  • Wear-free electronic attenuator for high reliability
  • Very cost-efficient with low initial costs and low cost of ownership
  • Frequency extension to 40 GHz with the R&S®SGU100A upconverter
  • Two instruments into one: one RF output for the entire frequency range
  • Seamless integration into existing user interfaces
  • Lowest form factor and power consumption on the market
  • High performance up to microwave frequencies
  • Frequency range: 58.32 GHz to 64.80 GHz ± ½ occupied modulation bandwidth
  • RF modulation bandwidth : 2GHz
  • Specified level range : –80 dBm to +5 dBm (PEP)
  • Up-conversion of R&S®SMW200A generated signals to mmWave frequencies
  • Flat frequency response independent of set level and frequency
  • Fully characterized in factory; no need for external frequency response correction prior to measurements
  • High spectral purity paired with high dynamic range
  • Seamless integration into the R&S®SMW200A operating concept for maximum usability




OUR CLIENTS