EMI/EMC Test Instruments

EMI Compliance

ESW EMI Test Receiver
ESU EMI Test Receiver
ESR EMI Test Receiver
  • Frequency ranges 2 Hz to 8 GHz, 2 Hz to 26.5 GHz and 2 Hz to 44 GHz
  • Compliant with CISPR16-1-1, ANSIC63.2, MIL STD 461 and FCC
  • Highest dynamic range and highest accuracy for demanding certification measurement
  • Ultrafast measurements with FFT-based time domain scan
  • Preselection with selectable highpass filters and notch filters for the ISM bands
  • EMI test receiver and signal and spectrum analyzer in a single box
  • Realtime spectrum analysis (R&S®ESW-K55 option) with 80 MHz bandwidth and spectrogram function
  • MultiView function for straightforward display of multiple operating modes on a single screen
  • Maximum-precision, standard-compliant
  • EMI measurements at unparalleled measurement speed
  • Combination of CISPR 16-compliant
  • EMI test receiver and high-end spectrum analyzer
  • High speed time domain scan (FFT) option
  • All commercial and military standards met
  • Internal preselection (can be switched off in analyzer mode)
  • Integrated 20 dB preamplifier up to 3.6 GHz as standard
  • Receiver mode with parallel IF analysis
  • Frequency scan with max. three detectors in parallel (max. 2 million test points/trace)
  • Second RF input (max. 1 GHz, pulse-protected)
  • Time-domain analysis for evaluation of timing behavior of disturbances (e.g. click-rate analysis)
  • Fast and reliable measurements using automatic and interactive test routines
  • Integrated report generator
  • Optional low-noise preamplifiers up to 8/26.5/40 GHz (R&S®ESU-B24)
  • EMI test receiver and signal/spectrum analyzer combined in a single instrument
  • Compliant with CISPR 16-1-1 Ed. 3.1
  • Preselection with integrated 20 dB preamplifier
  • Resolution bandwidths in line with CISPR and optionally in decade steps from 10 Hz to 1 MHz
    (MIL STD-461, DO-160)
  • Ultrafast time domain scan (option) or conventional stepped frequency scan
  • Realtime spectrum analysis with up to 40 MHz span for detailed investigation of disturbances (option)
  • Time domain display with high resolution (50 μs)
  • Automatic test routines
  • IF analysis (option)
ELEKTRA EMI Test Software
    Key Facts
  • Interactive and semi-automatic emission measurements
  • Preconfigured measurement settings for relevant EMC standards
  • Library with limit lines transducer factors
  • Flexible configuration of test report layouts
  • Measurements with LISNs and TEM waveguides

EMI Precompliance

R&S®FPC1000 EMI Debugging Solution
Recommended EMI Debugging Solution for conducted + radiated measurement
Recommended EMI Debugging Solution for radiated measurement
Key Specifications  
Frequency range 5 kHz to 1 GHz with upgrades up to 3 GHz
Low noise floor down to –165 dBm (typ. with preamplifier)
Connectivity LAN, USB, Wi-Fi (optional)
R&S®HM6050-2 LISN
Frequency range 9 kHz to 30 MHz
R&S®HZ-17 near-field probe
Frequency range 30 MHz to 3 GHz
DescriptionModel
conducted + radiated measurement kit
included instrument and accessories
Spectrum AnalyzerR&S®FPC1000
Receiver ModeR&S®FPC-K43
LISN 9 kHz to 30 MHz(GER/UK/US)R&S®HM6050-2
30 MHz to 3 GHz
1x E-field probe
1x H-field probe
R&S®HZ-17
Professional EMI software for measuring electromagnetic disturbancesELEKTRA EMI test software
Description Model
Radiated measurement kit
included instrument and accessories
Spectrum Analyzer R&S®FPC1000
Receiver Mode R&S®FPC-K43
30 MHz to 3 GHz
1x E-field probe
1x H-field probe
R&S®HZ-17
Professional EMI software for measuring electromagnetic disturbances ELEKTRA EMI test software
Recommended EMI Debugging Solution for conducted measurement
FPC1000 Spectrum Analyzer
HM6050 Two-line V-network (LISN)
Description Model
Conducted measurement kit
Included instrument and accessories
Spectrum Analyzer R&S®FPC1000
Receiver Mode R&S®FPC-K43
LISN 9 KHz to 30 MHz(GER/UK/US) R&S®HM6050-2
Professional EMI software for measuring electromagnetic disturbances R&S®ELEKTRA EMI test software

Key Facts

  • RF performance engineered in Germany
  • 10.1″ WXGA (1366 × 768 pixel) display
  • Frequency range from 5 kHz to 1 GHz, upgradable to 2 Ghz or 3 GHz with keycode
  • Resolution bandwidth settings down to 1 Hz
  • Wi-Fi-enabled, supported by included remote control and measurement software
  • Three-year standard warrenty
    Key Facts
  • Single-phase V-network to measure line-conducted interference’s from 9 kHz to 30 MHz (based on CISPR 16)
  • 115 V and 230 V versions available
  • Selectable transient limiter
  • Artificial hand connector
  • RS-232 interface for remote control
HZ-15 E and H near-field probe set
ESRP EMI Test Receiver
ESL EMI Test Receiver
    Key Facts
  • Special, electrically shielded magnetic field probes
  • Probe tips adapted to near-field measurement
  • High-resolution measurements
  • Easy-to-determine magnetic field orientation
  • Easy operation and handling
  • Frequency Range: 9 KHz to 3.6/7 GHz
  • EMI test receiver and signal/spectrum analyzer combined in one box
  • Optional preselection and preamplifier (R&S®ESRP-B2)
  • Resolution bandwidths in line with CISPR, optionally in decade steps from 10 Hz to 1 MHz (R&S®ESRP-B29)
  • Weighting detectors: max. peak, min. peak, average, RMS, quasi-peak, average with meter time constant, and RMS in line with current CISPR 16-1-1 version
  • Standard-compliant disturbance measurements for pulsed disturbances with repetition frequencies ≥ 10 Hz (with R&S®ESRP-B2 preselection/preamplifier option)
  • Very fast FFT-based time domain scan as an option (R&S®ESRP-K53)
  • Automatic test routines
  • IF analysis as an option (R&S®ESRP-K56)
  • Frequency range from 9 kHz to 3 GHz or 9 kHz to 6 GHz covering almost all commercial EMC standards
  • First-ever combination of an EMI test receiver and spectrum analyzer in the entry-level class
  • All major functions of an advanced EMI test receiver, including fully automated test sequences
  • Weighting detectors: max./min. peak, average, RMS, quasi-peak as well as average with meter time constant (CISPR-Average) and RMS-Average in line with the latest version of CISPR 16-1-1
  • Compact, lightweight instrument, can be battery-powered for mobile applications
TS9975 EMI Test System Family
OSP Open Switch and Control Platform
FSV Signal and Spectrum Analyzer
  • Conducted EMI measurements from 0.15 MHz to 30 MHz
  • Radiated EMI measurements from 30 MHz to 40 GHz
  • System automation by automatic path switching
  • Equipment for system calibration and system check is included

Additional features for wireless tests

  • Conducted spurious emission measurements from 100 kHz to 12.75 GHz on DUT antenna connector
  • Radiated spurious emission measurements from 30 MHz to 40 GHz
  • EIRP measurement
  • Carrier suppression by filters
  • Simultaneous transmission of different services possible (e.g. GSM and Bluetooth®)
  • Automatic stimulation and monitoring of the air link to the wireless device
  • Support of the R&S®CMU200 combines most common wireless standards in one unit
  • Automatic handover between different services or frequency bands
  • Compact size requiring little space
  • Optimal configuration by selecting the appropriate switch and control modules
  • Plug & play makes complex installation superfluous
  • Path control allows easy, reliable and independent switching of different switching paths using only one command
  • Easy generation of switching configurations owing to intuitive operating menu
  • Flexible system integration via Ethernet interface
  • Operation on the instrument ensures fast and direct access
  • The R&S®OSP150 extension unit allows the range of functions to be expanded as necessary
  • Special modules for EMC applications
  • Frequency range up to 4/7/13.6/30/40 GHz
  • Up to 160 MHz signal analysis bandwidth
  • Convenient, intuitive operation with touchscreen based user interface 5 GHz
  • 0.4 dB level measurement uncertainty up to 7 GHz
  • –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
  • +15 dBm third-order intercept (TOI)
  • Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
  • General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
  • Wireless measurement applications for LTE (including LTE-Advanced), WLAN (including IEEE 802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE, CDMA2000®/1xEV-DO, Bluetooth®
  • Frequency range up to 500 GHz with harmonics mixers
  • Keeping test data confidential with removable solid state or hard disk drives
FSW-K54 EMI Measurement
FSL Spectrum Analyzer
  • Standard-compliant EMI detectors: peak, quasi-peak, CISPR-average, RMS-average
  • EMI bandwidths for commercial and military standards
  • Trace wizard with up to six parallel traces
  • Measurement markers linked to various EMI detectors
  • Marker peak search function with color coding in frequency table
  • Limit lines and transducers for typical measurement tasks
  • Choice of linear or logarithmic scale on frequency axis
  • Up to 200 001 sweep points for higher spectrum resolution
  • AM/FM audio demodulation for easier identification of interferers
  • Remote control of V-networks (LISN) via built-in AUX port
  • Frequency range from 9 kHz to 3 GHz, 6 GHz or 18 GHz
  • Models with and without tracking generator
  • Signal analysis bandwidth of 28 MHz
  • Low measurement uncertainty, even in microwave range
  • General measurement applications, e.g. spectrogram
  • Lightweight and compact for on-site installation, maintenance and service
  • Optional battery operation
  • Easy on-site upgrading with options




OUR CLIENTS