Meters and Counters

HMC8012 Digital Multimeter
HM8012 Multimeter Module
HM8118 LCR Bridge/Meter
    Key Facts
  • Measurement range: DC to 100 kHz
  • Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F
  • Basic accuracy: 0.015 % (DC)
  • 5¾-digit display (480 000 counts)
  • Simultaneous display of three measurement functions, e.g. DC + AC + statistics
  • Measurement rate: up to 200 values/s
  • Measurement functions: V (DC), I (DC), V (AC), I (AC), frequency, DC power, resistance (two and fourwire), temperature (PT100/PT500/PT1000), capacitance, diode and continuity test
  • Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm
  • Data logging to internal memory or USB flash drive in CSV format
  • Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB)
  • SCPI commands largely compatible with Agilent 34410A (HMC8012-G)
  • HMC8012-G: HMC8012 incl. IEEE-488 (GPIB) interface
    Key Facts
  • 4¾-digit display with 50 000 counts
  • Basic accuracy: 0.05 %
  • Max. resolution: 10 µV, 0.01 dBm, 10 nA, 10 mΩ, 0.1 °C
  • Offset function/relative value measurement
  • RS-232 interface and software included
    Key Facts
  • Measurement range: 20 Hz to 200 kHz (69 steps)
  • Basic accuracy: 0.05 %
  • Measurement rate: up to 12 values/s
  • Automatic or manual selection of circuit type (serial, parallel)
  • Measurement functions: L, C, R, |Z|, X, |Y|, G, B, D, Q, Φ, ∆, M, N
  • Transformer measurement: mutual inductance and ratio
  • Internal: 0 V to 5 V/0 mA to 200 mA (resolution: 10 mV/1 mA)
  • External: 0 V to 40 V (bias voltage only)
  • RS-232/USB dual interface for remote control, optionally IEEE-488 (GPIB)
  • Fanless design
HM8018 LCR-Meter Module
HM8123 Universal Counter
HMC8015 Power Analyzer
    Key Facts
  • Measurement functions: L, C, R, Θ, Q/D, |Z|
  • Basic accuracy: 0.2  %
  • Five measurement frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 25 kHz
  • Max. resolution: 0.001 Ω, 0.001 pF, 0.01 µH
  • Two- and four-wire measurement, parallel and serial mode
    Key Facts
  • Measurement range: DC to 3 GHz
  • Input A/B (BNC): DC to 200 MHz
  • Input C (SMA): 100 MHz to 3 GHz
  • Input impedance A/B: 50 Ω or 1 MΩ (switchable), sensitivity 25 mV
  • Input impedance C: 50 Ω, sensitivity 30 mV
  • 10-digit resolution (at 10 s gate time)
  • Nine measurement functions, external GATE and ARMING connectors (BNC)
  • External reference input/output (10 MHz) via BNC connector
  • HM8123: TCXO (temperature stability: ±0.5 x 10-6), HM8123-X: OCXO (temperature stability: ±1.0 x 10-8)
  • RS-232/USB dual interface, optionally IEEE-488 (GPIB)
  • Fanless design
    Key Facts
  • Power measurement range: 50 μW to 12 kW
  • Analog bandwidth: DC to 100 kHz
  • Sampling rate: 500 ksample/s
  • 16 bit resolution for current and voltage
  • Basic accuracy: 0.05 %
  • 26 different measurement and mathematical functions




OUR CLIENTS