Power supplies HMP4030/HMP4040 Programmable Three/Four-Channel Power Supply HMP2020/HMP2030 Programmable Two/Three-Channel Power Supply HM8143 Three-Channel Arbitrary Power Supply Key Facts HMP4030: 3 × 0 V to 32 V/0 A to 10 A (384 W) HMP4040: 4 × 0 V to 32 V/0 A to 10 A (384 W) Low residual ripple due to linear postregulators Realtime voltage, current and power values High setting and readback resolution: 1 mV and 0.1/0.2/1.0 A (depending on current and model) FuseLink (electronic fuse) freely combinable for all channels FuseDelay tunable up to 250 ms EasyArb function directly programmable on device PC software (free of charge) for easy generation of user-defined waveforms Independently adjustable overvoltage protection (OVP) for each channel Advanced parallel and serial operation via V/I tracking Front connectors: 4 mm (0.16 in) safety sockets Rear connectors for all channels, including sense USB/RS-232 dual interface, remote control via SCPI-based commands Key Facts HMP2020: 1 × 0 V to 32 V/0 A to 10 A; 1 × 0 V to 32 V/0 A to 5 A (188 W) HMP2030: 3 × 0 V to 32 V/0 A to 5 A (188 W) Low residual ripple due to linear postregulators Realtime voltage, current and power values High setting and readback resolution: 1 mV and 0.1/0.2/1.0 mA (depending on current and model) FuseLink (electronic fuse) freely combinable for all channels FuseDelay tunable up to 250 ms EasyArb function directly programmable on device PC software (free of charge) for easy generation of user-defined waveforms Independently adjustable overvoltage protection (OVP) for each channel Advanced parallel and serial operation via V/I tracking Front connectors: 4 mm (0.16 in) safety sockets Rear connectors for all channels, including sense USB/RS-232 dual interface, remote control via SCPI-based commands Key Facts 2 × 0 V to 30 V/1 × 5 V, 3 × 2 A (max. 130 W) Realtime voltage and current values Linear regulated, two-quadrant power supply (current source and sink) Setting and readback resolution: 10 mV, 1 mA Electronic fuse and tracking Advanced parallel (up to 6 A) and serial (up to 65 V) operation Front connectors: 4 mm (0.16 in) safety sockets Sense connectors for line loss compensation (30 V channels) External modulation of output voltages up to 50 kHz Arbitrary module: 4096 points, 12 bit RS-232/USB dual interface, optionally IEEE-488 (GPIB) Download Datasheet Download Datasheet Download Datasheet NGE100B Power Supply Series HM7042 Triple Power Supply NGL200 Key FactsR&S®NGE102 with two or R&S®NGE103 with three channelsMax. output power of 66 W with R&S®NGE102, 100 W with R&S®NGE103 (33.6 W per channel)Max. output voltage of 32 V per channel (up to 64 V/96 V in serial operation)Max. output current of 3 A per channel (up to 6 A/9 A in parallel operation)Electronic fuse (OCP), overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP)USB interface (VCP/TMC), optional LAN (LXI), optional wireless LAN, Optional digital I/O (4bit) Key Facts 2 x 0V to 32V/0A to 2A; 1 x 0V to 5.5V/0A to 5A High-performance value laboratory power supply Floating, overload and short circuit-proof outputs Separate voltage and current displays for each output; 4 digits at channel 1 + 3; 3 digits at channel 2 Display resolution: 10mV/1mA at channel 1 + 3; 10 mV/10 mA at channel 2 Protection of sensitive loads by current limit or electronic fuse Pushbutton to activate/deactivate all outputs Low residual ripple, high output power, excellent regulation Parallel (up to 9 A) and series (up to 69.5 V) operation Temperature-controlled fan HZ42 19 “ rackmount kit (2RU) Max. output power: 120 W Voltage per channel: 0 V to 20 V Max. current per channel: 6 A Load recovery time: < 30 µs Ripple and noise: < 500 µVRMS / < 1 mARMS Download Datasheet Download Brochure Download Datasheet Download Datasheet HMC804x DC NGP800 NGE100B Key Facts Clear display of all measured parameters Galvanically isolated, floating and short-circuit proof outputs Protective functions adjustable for each channel Ideal power supply for hardware developers and labs Remote control Key Facts Max. output power: 800 W Max. voltage per channel: 32 V or 64 V Max. current per channel: 10 A or 20 A Up to 250 V or 80 A in series or parallel operation Large touch display Key Facts R&S®NGE102B with two or R&S®NGE103B with three channels Max. output power of 66 W with R&S®NGE102B, 100 W with R&S®NGE103B Max. output voltage of 32 V per channel Electronic fuse (OCP), overvoltage (OVP)/ -power(OPP)/ -temperature protection (OTP) USB interface (VCP/TMC), optional LAN (LXI), optional wireless LAN, optional digital I/O (4bit) Download Datasheet Download Datasheet Download Datasheet NGM200 Key Facts Max. output power: 120 W Voltage per channel: 0 V to 20 V Max. current per channel: 6 A Resolutions down to 1 µV/10 nA 500 ksample/s high-speed data logging Download Datasheet Quick Contact Facebook Twitter Linkedin Name* Email* Message Captcha OUR ESTEEMED CLIENTS