Radio Monitoring / Direction Finding

PR100 Portable Receiver
DDF007 Portable Direction Finder
DDF255 Digital Direction Finder
    Key Facts
  • Fast panorama scan across the entire frequency range from 9 kHz to 7.5 GHz
  • 10 MHz IF spectrum and demodulation with bandwidths from 150 Hz to 500 kHz
  • Spectrum and spectrogram (waterfall) display on 6.5″ color screen
  • Storage of measurement data to receiver’s built-in SD card
  • LAN interface for remote control and data output
  • Ergonomic and rugged design for portable use
  • Low weight: 3.5 kg including battery
  • Manual location of emissions with the R&S®HE400 handheld directional antenna (9 kHz to 7.5 GHz)
  • Automatic location of emissions with direction finding algorithms (20 MHz to 6 GHz)
  • Display of digital maps on the R&S®PR100; triangulation based on multiple, manually or automatically determined DF results
    Key Facts
  • Wide frequency range from 20 MHz to 6 GHz (DF mode) and 9 kHz to 7.5 GHz (receive mode)
  • High-precision correlative interferometer DF method
  • Integrated, fast wideband receiver with optional panorama scan for fast scanning of wide frequency ranges
  • Compact, multi-element DF antennas with integrated GPS module and electronic compass; optional magnet mount adapter for fast antenna installation on a vehicle roof
  • Optional, integrated map display function including triangulation for transmitter location by means of a running fix
  • Compact, lightweight lithium-ion battery pack for two hours of DF operation or four hours of receive operation on a single battery charge
    Key Facts
  • Tried and tested DF method used by 24 regulatory authorities worldwide
  • High-precision DF method at an excellent price/performance ratio (patented method)
  • Reliable DF results even in difficult environments (e.g. urban areas with up to 50 % reflection)
  • Direction finding of signals in the frequency range up to 8.2 GHz
  • Detection of extremely short emissions at unknown frequencies due to high-speed panorama scan (optional)
  • Measurement methods in line with ITU recommendations (optional)
  • Realtime event capture (REC) for I/Q recordings and realtime replay (optional)
ESMD WIDEBAND MONITORING RECEIVER
EB500 MONITORING RECEIVER
EB510 HF MONITORING RECEIVER
  • ITU-compliant measurements and applications for security authorities and organizations
  • Wide frequency range: from 8 kHz to 40 GHz (base unit: 20 MHz to 3.6 GHz) Up to 80 MHz realtime bandwidth (base unit: 20 MHz)
  • Time domain analysis up to 20 MHz bandwidth
  • Realtime event capture (REC) for I/Q recordings and realtime replay
  • Various result displays
  • Integration into customer-specific software packages from third-party suppliers thanks to open, documented remote control interface and data formats
  • Internal recording and replay of spectra and waterfall data (for receivers with front panel operation or for external R&S®ESMD GUI software)
  • Map display with GNSS position (for receivers with front panel operation or for external R&S®ESMD GUI software)
    • Key Facts
    • ITU-compliant measurements and applications for security authorities and organizations
    • Wide frequency range: 8 kHz to 6 GHz (base unit: 20 MHz to 3.6 GHz)
    • 20 MHz realtime bandwidth
    • Numerous options to increase performance
    • Various result displays
    • Integration into customer-specific software packages from third-party suppliers thanks to open, documented, remote control interface and data formats
    • Internal recording and replay of spectra and waterfall data (for receivers with front panel operation or for external R&S®EB500-GUI software)
    • Map display with GPS position (for receivers with front panel operation or for external R&S®EB500-GUI software)
      Key Facts
    • Digital direct conversion receiver from 8 kHz to 32 MHz
    • IF spectrum of up to 32 MHz and parallel demodulation with bandwidths from 100 Hz to 5 MHz
    • Fast panorama scan with up to 60 GHz/s across the entire frequency range
    • High-speed frequency and memory scan with up to 1600 channels/s
    • Polychrome IF spectrum for reliable detection of pulsed signals
    • Spectrum and spectrogram (waterfall) display on receiver (model .03) or on PC via the R&S®EB510-Control software (both model .02 and model .03) AM, FM, I/Q, AM2, FM2, I/Q2 video panorama
    • 1 Gbit LAN interface for remote control and data output
    • Comparatively low power consumption for efficient DC operation, e.g. on a vehicle battery
    • Space-saving system integration due to ½ 19″ width and three height units
    • Classification and analysis of signals up to 5 MHz bandwidth (analog and digital modulation) through evaluation of the I/Q data stream using the R&S®CA100IS software (in offline mode)
    • Multichannel digital downconversion (DDC) within realtime bandwidth
    Signal & Spectrum Analyzer- Modulation Analyzer
    EVSG1000 VHF/UHF Airnav/Com Analyzer
    EVS300 ILS/VOR Analyzer
    EDS300 DME/Pulse Analyzer
      Key Facts
    • High-precision analysis of ILS, VOR and marker beacon ground systems (in line with ICAO Doc 8071 and ICAO Annex 10)
    • Analysis of air traffic control communications (ATC COM) signals
    • High dynamic range of >130 dB, precise level and modulation depth measurements
    • Spectrum preview and detailed analysis options in the frequency and time domain
    • Extremely compact, with integratable battery
    • Dynamic measurements at up to 100 data records/s in high measurement rate mode
    • Simultaneous analysis of course and clearance signals on dual-frequency (2F) ILS systems
      Key Facts
    • Extremely fast (100 measurements per second)
    • Synchronization via GPS, trigger and remote interfaces
    • Digital separation of course and clearance signals using only one signal processing channel (R&S®EVS-K3 option)
    • Expandable to support a second signal processing channel for simultaneous localizer and glideslope measurements (R&S®EVS-B1 option)
    • Support for R&S®NRP-Zxx and R&S®NRT-Zxx power sensors (R&S®EVS-K5 option) Measurement of GBAS and SCAT systems (R&S®EVS-K9 and R&S®EVS-K10 options)
      Key Facts
    • High-precision measurement of DME and TACAN systems on the ground and in the air (in line with ICAO Doc. 8071, ICAO Annex 10, STANAG 5034 and MIL-STD-291C)
    • Total peak level deviation < 1 dB
    • Receiver aquisition sensitivity –97 dBm
    • 0.01 NM distance measurement uncertainty down to –80 dBm
    • 0.2° TACAN bearing deviation for input levels ≥ –80 dBm
    • Detailed automated pulse shape analysis
    • Multi-DME mode for measuring up to ten DME stations quasi-simultaneously, i.e. within 50 ms (R&S®EDS-K5)
    • Synchronization via GPS, trigger and remote interfaces
    Network Analyzer- Extensions
    ZVA-Z Millimeter-Wave Converters
    ZCxxx Millimeter-Wave Converters
    ZVAX-TRM Extension Unit
      Key Facts
    • Variable output power
    • Electronic power control
    • Automatic parameter setting
    • Convenient handling
    • Multiport and true differential measurements
    • Pulsed measurements
    • Calibration
    • R&S®ZVA-Z325 and R&S®ZVA-Z500 special compact version
    • R&S®ZVA-Z110E: Electronic power control for power calibration, and calibrated power sweeps
      Key Facts
    • Wide frequency range
      • 110 GHz to 170 Ghz (R&S®ZC170)
      • 140 GHz to 220 GHz (R&S®ZC220)
      • 220 GHz to 330 GHz (R&S®ZC330)
      • 325 GHz to 500 GHz (R&S ZC500)
    • For use with an R&S®ZVA24, R&S®ZVA40, R&S®ZVA50, R&S®ZVA67 or R&S®ZVT20 network analyzer
      • Wide dynamic range
      • > 90dB, typ. 105dB (R&S®ZC170)
      • > 100 dB, typ. 110 dB (R&S®ZC220)
      • > 100 dB, typ. 115 dB (R&S®ZC330)
      • > 85dB, typ. 100dB (R&S ZC500)
    • Variable output power
    • Automatic parameter setting
    • Easy handling
    • Highly stable
    measurements
    Key Facts
    • Extension unit for an R&S®ZVA/ZVT network analyzer for measurements on T/R modules, receivers, transceivers and power amplifiers
    • Base unit supports power levels up to +43 dBm
    • Options for pulse modulation, amplification, high-power, noise figure and intermodulation measurements
    • R&S®ZVAX‑TRM models up to 24/40/50/67 GHz
    • Flexible configuration for the required application
    • Straightforward dialogs for measurement configuration
    • Automatic detection and control of R&S®ZVAX‑TRM via USB interface




    OUR CLIENTS